Filter
Top Products
– 11 –
Disconnect the electrical connector from the
motor. Remove 2 screws that hold the motor in
place and remove the motor.
Top Stirrer Motor
Resistance through the top stirrer motor from the
power cord (L) to CN04 pin 5 is approximately
6.7 ohms. Isolated, the top stirrer motor is
approximately 7.0 ohms. The door (primary
interlock) must be closed to complete circuit.
Check motor circuit for 21 VAC when operating.
Removal
Remove the microwave (see
Microwave Removal
and Component Access).
Disconnect the side stirrer motor electrical
connector. Remove 2 screws and ground wire
from the duct and move the duct out of the way.
Disconnect
Top Stirrer
Removal
Open the oven door. Pull the plastic rivet out of the
stirrer cover. Rotate the stirrer cover CCW until it
stops and remove the stirrer cover.
Remove the stirrer.
Rivet
Note: When assembling, assure that the stirrer
rides on the support in the cover.