Filter
Top Products
Installation Instructions
ISTEP 111SECURE DISHWASHER
TO CABINET
The dishwasher must be secured to the countertop.
• Position the dishwasher so that the tub flange aligns
with the front face of the cabinet frame.
IMPORTANT: Check to be sure the dishwasher is
centered in the opening and there is no interference
with adjacent cabinets when opening or closing
the door.
Align Tub
Flange
to Front
Faceof
Cabinet
Frame
FigureS
• Fasten the dishwasher to the underside of the
countertop with the 2 Phillips screws provided.
IMPORTANT- Drive screws
straight and flush, Protruding screw heads will
scratch the top of the control panel and can interfere
with door closing,
[STEP 12] CONNECT WATER SUPPLY
Connect water supply line to 90° elbow.
• Slide compression nut, then ferrule over end of
water line.
• Insert water line into 90° elbow.
• Slide ferrule against elbow and secure with compres-
sion nut,
FigureT
Hot Water
C__Supply Line
IMPORTANT-Checktobe sure
that door spring does not rub or contact the fill hose or
water supply line. Test by opening and closing the door.
Re-route the lines if a rubbing noise or interference
occurs.
9