GE Model 21 Refrigerator User Manual


 
Consumer SupportTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
17
To Replace the Freezer Drawer
IMPORTANT: Two people may be required to complete
this procedure.
Pull out both interior rail assemblies to full length
on each side of cabinet. Locate notches in both
interior rail extensions.
Align tabs on outside edge of drawer rail assemblies
with notches in both rail extensions.
Insert the hook tab into the corresponding notch in
the interior rail extension at a 45° angle. Insert the
other tab into the corresponding notch in the
interior rail extension by lowering the handle end of
the drawer assembly.
Replace the Phillips screws on both rail extensions.
Replace the two freezer baskets.
Notches
Notches
Tabs
Notches
Notches
Tab
Hook
Tab
Phillips
Screw