Filter
Top Products
Advantium Oven
Speedcooking
Advantium is already pre-set to cook
over 175 popular dishes.
1. Press the speedcook pad.
If no selection is made within
15 seconds, the display will revert
back to the time of day.
2. Turn the selector dial to select
the type of food category you
want. Press the dial to enter.
3. Turn the selector dial to select the
specific food (menu selection).
Press the dial to enter.
4. Turn the selector dial to select
amount, size, and/or doneness
(if required, the oven will prompt
you). Press the dial after each
selection.
5. Once the display shows:
ADJUST TIME or START either press
start or the selector dial to start
cooking.
Turn the food over when the oven
signals TURN FOOD OVER (for certain
foods).
When the oven signals CHECK for
DONENESS, check to see if your food is
done to your liking (for certain foods).
To review settings during cooking,
press the selector dial.
If you enter an undesired selection at
any time, simply press the BACK pad
and re-enter the desired selections.
Using
speedcook
features
CAUTION: When using speedcook programs, remember that the
oven, door and dishes will be very hot!
Prior to the first use of your oven, the clock must be set. See the Advantium
Quick Start section.
Before you begin, make sure the turntable is in place. Use the non-stick metal
tray and your own glass or ceramic cookware, if needed.
The turntable must always be in place
when using the oven.
Put food directly on the non-stick
metal tray to speedcook.
SPEEDCOOK PRE-SET FOOD SELECTIONS:
■ Appetizers ■ Desserts ■ Pizza ■ Sandwich
■ Breads ■ Entrees ■ Potatoes ■ Seafood
■ Breakfast ■ Meats ■ Poultry ■ Side Dish
To use a
pre-set
speedcook
menu
■ Early in a speedcook program, you
will see OPTIMIZING COOK TIME on
the display. The oven automatically
senses the electrical voltage level in
your home and adjusts the cooking
time up or down for proper cooking.
■ If the door is opened during cooking,
the oven will stop and PAUSE will
appear in the display. Close the door
and press the START/PAUSE pad
to resume cooking.
■ At anytime during cooking you can
turn the selector dial to change the
cooking time. You can change power
levels by pressing POWER/TEMP.
■ To assure consistent cooking results,
the oven may adjust power levels
downward if the oven is hot at the
beginning of a program.
■ At the end of cooking, the automatic
fan may continue to run for a short
time to cool internal components.
■ To cook for additional time after a
cooking cycle has been completed,
use the resume feature.
13