GE PVB94 Ventilation Hood User Manual


  Open as PDF
of 32
 
13
Installation Instructions
4 CONNECT POWER
Plug power cord into properly grounded receptacle.
CLEANING
Painted or Stainless Steel Surfaces
To clean the stainless steel or painted surfaces,
use warm, sudsy water or a stainless steel cleaner
or polish.

filters in the dishwasher.
5
INSTALL FILTERS, CHECK OPERATION

to raise the vent.

straight up and then down.




turn off when the vent is lowered.
NOTE:
before lowering the vent. The fan will automatically
turn off when the vent is lowered. When the fan
is not turned off before lowering the vent, it will
automatically come on at the previously set speed
when the vent is fully raised.

IMPORTANT: The vent can be activated by pressing


could occur and void the warranty.
Filter Tabs
 previous next