Filter
Top Products
10
Consumer Support Troubleshooting Tips Care and Cleaning Operating Instructions Safety Instructions
BAKE Pad
Touch to select the bake function.
BROIL HI/LO Pad
Touch to select the broil function.
CONVECTION BAKE Pad
Touch to select baking with the convection
function.
CONVECTION ROAST Pad
Touch to select roasting with the
convection function.
PROOF Pad
Touch to select a warm environment useful
for rising yeast-leavened products.
START Pad
Must be touched to start any cooking or
cleaning function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function
error code. Touch the CLEAR/OFF pad. Allow the oven to
cool for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
oven and call for service.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
The time of day will flash in the display when there
has been a power outage.
SELF CLEAN LO/STD Pad
Touch to select self-cleaning function. See
the Using the self-cleaning oven section.
OVEN LIGHT ON/OFF Pad
Touch to turn the oven light on or off.
DELAY START Pad
Use along with COOK TIME or
SELF CLEAN LO/STD pads to set the oven
to start and stop automatically at a time
you set.
COOK TIME Pad
Touch and then touch the number pads to
set the amount of time you want your food
to cook. The oven will shut off when the
cooking time has run out.
CLEAR/OFF Pad
Touch to cancel ALL oven operations
except the clock and timer.
CLOCK Pad
Touch before setting the clock.
Number Pads
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
PROBE Pad
Touch when using the probe to cook food.
WARM Pad
Touch to keep cooked foods warm. See the
How to Set the Oven for Warming section.
WARMING ZONE Pad (on some models)
Touch this pad when using the center
surface unit to keep food warm until ready
to serve.
Using the oven controls.
(Throughout this manual, features and appearance may vary from your model.)
OR
Oven Control, Clock and Timer Features and Settings
Features and appearance may vary.