Filter
Top Products
16
ZPF25 Custom Door Panel Kit
1/4" Thick Custom Door Panel
• Cut door panel to the dimensions shown.
• The bottom left and right corners should
be cut at 1/4” radius. See illustration.
Note: The trim will conceal the cut edges of the panels.
To prevent electrical shock,
disconnect electrical power
supply to dishwasher before
changing panels. Do not
operate dishwasher when
door assembly is removed.
ZPF25B, Black trim
ZPF25W, White trim
Tools and Materials required
• Phillips screwdriver
• Gloves to protect against sharp edges.
Step 1
Cut 1/4”
Thick Custom
Panel to Size
1/4" Thick
Door Panel
25-1/2"
23-1/8"
1/4"
Radius
Cut
Note:
It is best that 2 people perform this installation.
The ZPF25 trim kit provides support for 1/4”
thick custom door panel.
Note:
Maximum custom panel weight is
10 pounds.
• Metal door
• 8 wood screws
• 6 “C” clips
• Door Trim
• 2 Door Springs
Kit Contents
(8) Screws
Metal Door
Door Trim
2 Door
Springs
“C” Clips
Pour éviter les
électrocutions, il faut
débrancher l’alimentation
électrique du lave-vaisselle
avant de changer les
panneaux. Il ne faut pas
faire fonctionner le lave-
vaisselle quand la porte est déposée.
AVERTISSEMENT
WARNING