Filter
Top Products
19
ZPF75 Custom Panel Kit
3/4" Thick Custom Door Panel
ZPF75B, Black
ZPF75W, White
Tools and Materials required
• Phillips screwdriver
• Gloves to protect against sharp edges
• Nut driver
Step 1:
Determine
Custom
Panel
Sizes
The custom panel should be constructed in
the same manner as cabinet doors. All edges
can be seen and must be finished for the best
appearance.
Note:
It is best that 2 people perform this installation.
The ZPF75 provides for the installation of
1/2” to 3/4” thick custom door panel.
Note:
Maximum custom panel weight is
10 pounds.
• Metal door
• Support bracket
• Label
• 18 Screws
• 2 Door springs
Kit Contents
Screw X
(10) Wood Screws
Screw Y
(6) Not Used
Screw Z
(2) Support Bracket
Screws
Door Springs
Metal Door
Support
Bracket
Dim. A*
*Height
23-1/8"
Custom
Panel Size
Floor
Cabinets
Countertop
Top
3/4" Max.
3/4" Thick
Door Panel
Bottom of
Adjacent Cabinetry
*Height is equal to A minus 5-1/8" plus 1/4"
EXAMPLE:
*Height = 30-1/2" minus 5-1/8" plus 1/4" is equal to 25-5/8".
• Measure dimension A, from underside of
countertop to bottom of adjacent cabinets.
– Subtract 5-1/8". Control panel height is 5".
Allow 1/8" for gap between bottom of
countertop and top of control panel.
– Add 1/4". The custom panel will slide up,
behind control panel.
To prevent electrical shock,
disconnect electrical power
supply to dishwasher
before changing panels.
Do not operate dishwasher
when door assembly is
removed.
Pour éviter les
électrocutions, il faut
débrancher l’alimentation
électrique du lave-vaisselle
avant de changer les
panneaux. Il ne faut pas
faire fonctionner le lave-
vaisselle quand la porte est déposée.
AVERTISSEMENT
WARNING