Filter
Top Products
Design Guide
1/4" FRAMED PANEL DIMENSIONS
If you choose to install framed panels, they must be
cut to tile dimensions shown. Tile panels will slide
into tile frame on tile door, drawer and ,rille
If tile custom panel is less than 1/4" thick and if it
fits loosely in tile door fi'ame, it can be backed up
with a piece of filler material or fi_am tape to
improve the fit.
Door
/ Reveal
I_A_I
[ GrillePanel ]_
FreshFood 1_
Panel
FreezerDrawer D
Panel
IMPORTANTNOTE:Maximum total panel
weight:
• Freshfood door panel-58 Ibs.
• Freezerdrawer panel- 28 Ibs.
• Grille Panel- 11Ibs.
FramedPanel Dimensions
A (Width) B (Grille Height) C(FFHeight) D (FZHeight)
1/4"Framed Panel 33-7/8" 8-7/8" 46-1/16" 21-7/8"
OverlayPanelDimensions
A (Width) B (Grille Height) C(FFHeight) D (FZHeight)
1/4"Backer Panel 33-7/8" 8-7/8" 46-1/16" 21-7/8"
0.10"Spacer Panel 32-1/2" 7-5/8" 44-11/16" 20-1/2"
3/4"Overlay Panel 34-1/8" 9" 46-5/16" 22"
3/4" OVERLAY PANEL DIMENSIONS
For a i/lore Ctlstoill _ll)l)e_lr_liice _ overlay l)_lnels Ill,IV be
installed on trimmed models. The overlay panel must
be secured to a 1/4" thick backer panel which slides
into the t_im. A spacer panel 0.10" thick must be
placed between the overlay and backer panel.
Assemble tile panels with glue and screws.
• Center the spacer panel on the backer panel, leit to
right and top to bottom. Secure the panels with glue.
• Center tile spacer and backer panel on the overlay
panel and secure with glue and screws. Screws must
be co/mtersunk into the backer panel.
Door/Drawer
\
\\
\
1/4"
Backer,. .
Panel_ _Spacer
IMPORTANTNOTE:Maximum
total weight for the assembled
panels:
• Fresh food door panel-58 Ibs.
• Freezer drawer panel- 28 Ibs.
• Grille Panel- 11Ibs.
NOTE: I,eft-to-right oiiset is not always equal to
top-to-bottom oiiset.