Filter
Top Products
INSTALL GRILLE BASE WRAP
• Open doors fully. Open the grille panel.
• Install the unified double width grille base wrap (E)
by slipping the notched ends over the door hinges.
• Install one screw (I) on each end and 2 at the center.
14
17
Installation Instructions
CONNECT WATER SUPPLY
15
• Locate and bring tubing to the front of the cabinet.
• Turn the water on to flush debris from line. Run
about a quart of water through tubing into a
bucket, then shut off water.
Copper Tubing:
• Slip a 1/4″ nut and ferrule (provided) over both
ends of the copper tubing. Insert tube into the
union fitting on the unit and tighten nut to union.
• Turn on the water to check for leaks.
GE SmartConnect
™
Tubing:
• Insert the molded end of the tubing into the
refrigerator connection. Tighten the compression
nut until it is just hand tight.
• Tighten one additional turn with a wrench.
Overtightening can cause leaks!
• Turn on the water to check for leaks.
NOTE: Make sure excess tubing length does not
interfere with drawer closing or toekick installation.
Connect both refrigerators to the water supply.
House
Water Supply
Refrigerator
Water Supply
Unified Grille Base Wrap
Place Trim
Over Hinges