Filter
Top Products
INSTALL SIDE PANELS
Side panels must be used whenever the sides
of the refrigerator will be exposed. The 1/4″
side panels will slip into the side case trim.
Secure the panels to the refrigerator with
stick-on hook and loop fastener strips. Order
the side panels from the cabinet manufacturer.
• Cut a notch in the top front corner as shown
to allow clearance for corner keys in the front
side trim.
Skip this step if you are not using side panels.
4
INSTALL NEW SIDE TRIM
CAUTION: Handle parts with care to avoid
scratching.
PRUDENCE : Manipulez les pièces
soigneusement pour éviter de les rayer.
A. Install inside case trims (B & C) with notches
toward the bottom. Install screws (I) through 5 slots
on each trim.
B. Apply the supplied foam spacer pads (H) to the
mating side of one product as shown.
3
8
* Depending on
installation height.
Installation Instructions
Foam Spacer
Pads
24″
*84″
3/16″
1-7/8″
*3″ to 4″
2-9/16″