Filter
Top Products
INSTALL ANTI-TIP BRACKETS
WARNING: ANTI-TIP PRECAUTIONS
These refrigerators are top-heavy and must be
secured to prevent the possibility of tipping forward.
ATTENTION : PRECAUTIONS CONTRE LES
BASCULEMENTS
Ces réfrigérateurs sont beaucoup plus lourds
en haut et il faut les maintenir en place pour éviter
la possibilité de son basculement vers l’avant.
• Cut a 2″ x 4″ x 71″ block and secure the block to the
mounting brackets provided using #12 or #14 wood
screws.
• Secure the bracket with wood block to the back wall
so that it is 84″ (or your installation height) from the
finished floor. Use #12 or #14 wood screws. See
illustration.
• Screws must penetrate at least one inch into vertical
wall studs.
IMPORTANT NOTE: When the refrigerator is installed
under a soffit or if there is not enough height for this
method of security, brackets cannot be used. Step 8 is
an alternate anti-tip procedure to secure refrigerator
to cabinets after it has been pushed into the final
position. The refrigerator must be secured to prevent
tipping.
5
9
Installation Instructions
2 x 4 Cut
71″ Length
Installation Height
From Floor
Screws Mounted into
Vertical Wall Studs
Mounting
Bracket
Brackets
Required
Brackets
Not Required
Beneath a
Soffit
Height
From
Floor to
Bottom
of
Wood
Block
Side View
Block
Soffit