Filter
Top Products
Self-Cleaning Oven
Stainless Steel Range
20
How to set
the oven for
self-cleaning
The clean cycle takes about 5 hours plus about
30 minutes to cool down.
1 Push in the CLEAN selector button.
2 Set the thermostat dial to CLEAN.
• Cooling blower turns on.
• The OVEN ON light and HEATING light
turn on.
• The DOOR LOCKED light turns on.
3 When cleaning has finished, push the OFF
selector button.
The blower and the OVEN ON light will turn
off once the cycle has finished.
The door latch will open automatically after the
oven temperature falls below 550°F.
Thermostat dial
After a
clean cycle
If white spots remain, remove them with warm
sudsy water and rinse thoroughly with a vinegar
and water mixture. These deposits are usually a
salt residue that cannot be removed by the
clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.