Filter
Top Products
THE COOLING SYSTEM
The cooling unit temperature display
indicates the
liquid temperature in
the wine vault, rather than the
air
temperature
in the wine vault. This
ensures optimal wine temperature
preservation and allows for temperature
adjustment betw
een 45°F and 85°F.
The liquid thermostat is equipped with a Self-Calibrating Probe, which contains a sensor
that communicates with the thermostat to ensure a consistent temperature.
To use the liquid thermostat:
Step 1:
Fill a clean, empty 750 ml wine bottle 3/4 full with room-temperature tap water.
Step 2: Place the bottle probe securely into the bottle.
Step 3: Place the bottle with probe in a central location out of the direct path of the air
coming from the cooling unit
(see recommended location) in your wine vault. Avoid
stretching the probe cord. It may become disconnected, resulting in the unit not
working properly.
Liquid Temperature Display
Installing the probe in a bottle
R
ecommended location for pr
obe
16
Before the use of corks, jars were closed with a wad of leaves and mud.
SET
TEMPERATURE
WINE
SET
ON