Filter
Top Products
HOW TO OPERATE YOUR
DIS~ASHER
step
1. Load your dishwasher with dishes,
step
2.
Add detergent to the detergent dispenser.
silverware, pots, pans, bowls, etc. according to
Use rinse aid agent to help prevent spotting. (See
instructions in the Loading section.
How to Use a Rinse Agent section.)
Close and latch dishwasher door.
CYCLE PHASE
ENERGY MONITOR —
TIME TO END OF CYCLE
SYSTEMS
I
CYCLES
POT-
NORMAL SHORT
CHII
SCRUBBER WASH
WASH
CRVS
1111
,000[
Systems Monitor
/
This panel tells you what is
happening in the dishwasher
and can alert you to some
possible problems.
Information displayed:
● Selected wash cycle
● Selected dry option
● Minutes to end of cycle
● Cycle phase, such as WASHING,
RINSING or DRYING
● Diagnostic codes to alert you to
possible problems
●
Relative energy used by each cycle.
Lets you choose the cycle you need
that uses the least energy.
See Systems Monitor section for
explanation of displays and codes.
Step 3. Select desired wash cycle.
/
Touch the center of the pad.
● POTSCRUBBER is for items
such as pots, pans and casseroles.
Everyday dishes may be included.
● NORMAL WASH is for loads
of everyday dishes with medium
soils. Designed to yield high
performance on normal loads.
● SHORT WASH is for most
loads of everyday dishes with
light soils or soils that have not
dried on. It saves hot water over
the higher performance cycles,
thus saving energy.
Pre-rinse
dishware before loading.
●
CHINA CRYSTAL
is for lightly
soiled
china and crystal. The wash
action is softened by pumping air
along
with the water to protect
you]
delicate items.
Pre-rinse
dishware
before
loading.
Follow loading
instructions in the Loading section.
. RINSE & HOLD is for rinsing
partial loads which will be washed
later.
Do
not
use detergent. Do
not use DELAY START with
this cycle.
To change a setting,
just touch
desired pad.
Your dishwasher is now
automatically programmed
including a Soil Option Selection.
Cycle Indicator Lights tell you
the complete program and a number
in the SYSTEMS MONITOR will
tell you how long the cycle will
t~e.
If you’re satisfied, just touch
the START pad.
6