Filter
Top Products
10
Assemble
Step
burners,
ctick
ignition
Electric Components:
Push in and turn each knob to high position. Make
sure each heating element heats up.
Gas Components:
(Electrical connections should be complete.)
“ Plug power cord into outlet.
“ Assemble burner as shown.
“ Check for proper ignition:
- Push in one control knob and turn 90° to HIGH
position.
“ First test may require some time, while air is flushed
out of the gas line:
- Turn knob to OFF.
– Repeat the procedure for each burner.
?Bumer
< W Grate
I
E-’
~Trim Ring
1
Dfagram571