Filter
Top Products
To remove and replace the shelf:
1. Remove all items from the shelf. Remove the shelf by raising
the front and pulling it forward.
2. Replace the shelf by lifting the front while sliding the shelf
back until it locks into place.
\
J
r..__
Frozen Food Storage Guide
Storage times will vary according to the quality and type of food,
the type of packaging or wrap used (should be airtight and
moisture-proof), and the storage temperature. Seal the package
or container securely to prevent taste and odor transfer
throughout the product. Ice crystals inside a sealed package are
normal.
Put no more unfrozen food intothe freezer than will freeze within
24 hours (no more than 2 to 3 Ibs. of food per cubic foot [907-
1,350 g per L] of freezer space). Leave enough space in the
freezer for air to circulate around packages. The freezer door
must close tightly. For more information on preparing food for
freezing, check a freezer guide or reliable cookbook.
DOOR FEA'IURES
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the cover or in the "Assistance or
Service" section.
The door rails may be removed for easier cleaning.
To remove and replace the rails:
1. Remove the railsby pullingstraight upon each end of the rail.
2. Replace the rails by sliding the shelf rail into the slots onthe
door and pushing the rail straight down until it stops.
To remove and replace the bins:
1. Remove the bin by lifting itand pulling it straight out.
2. Replacethebinbyslidingitinabovethedesiredsupportand
pushing it down until it stops.
To remove and replace the wire door shelf:
1. Remove the wire door shelf by lifting it out of the door rail.
2. Replace the door shelf by sliding it into the back of the door
rail and snapping it into place.
To remove the rack:
1. Remove the rack bylifting it and pullingstraight out,
2. Replace the rack by sliding it in above the supports and
pushing it down until it stops.