Filter
Top Products
6 309160
Installation
WARNING
THERMAL EXPANSION HAZARD
Fluids subjected to heat in confined
spaces, including hoses, and create a
rapid rise in pressure due to the thermal
expansion. Over–pressurization can
result in equipment rupture and serious injury.
S Open a valve to relieve the fluid expansion
during heating.
S Replace hoses proactively at regular intervals
based on your operating conditions.
WARNING
SKIN INJECTION HAZARD
To reduce the risk of serious injury,
follow the Pressure Relief Procedure
on page 7 whenever you are instructed
to relieve pressure.
NOTE: Pressure check the hose assemblies. Refer to
your system operation manual for priming and pressur-
izing the fluid hoses. Check carefully for leaks at the
hose connections. If there are leaks, relieve the pres-
sure as instructed on page 7.
1. Do not use hose to pull the equipment.
2. Use 2 wrenches to tighten. Torque to specification:
Torque,
Fitting in–lb ( NSm)
–4 150 (16.9)
–6 300 (33.9)
–8 500 (56.5)
–10 700 (79.1)
–12 1000 (113.0)
–16 1400 (158.2)
–20 2100 (237.3)
–24 3000 (339.0)
3. Do not tape or cover hose.
4. Do not flex hose when cold.
5. Use hose support spring.
6. Do not clamp, squeeze, or zip tie hose.
7. Minimum bend radius:.
Fitting Radius
–4 8 in. (203 mm)
–6 8 (203)
–8 10 (254)
–10 12 (305)
–12 14 (356)
–16 18 (457)
–20 22 (559)
–24 26 (660)
8. Do not bend or crimp hose.
9. Do not twist hose.
10. Use proper length hose.