Filter
Top Products
Installation
309572ZAG 17
6.
For non-RTD hoses only,
connect
thermocouple cables (4). Slide insulator
sleeves (S) over connection. Leave slack
in cables as stress relief to prevent cable
failure.
7.
For RTD 2-component hoses only,
connect
RTD cables (4) and CAN cables (5) if pres-
ent.
8. Repeat for additional hoses.
9. See Connect FTS and Heated Dual Whip
Hose, page 18, or Connect FTS with a
Non-Heated Whip Hose or Remote Mix
Manifold, page 20.
F
IG
. 11
F
IG
. 12
TI2683B
S
4
TI18358a
5
4