Filter
Top Products
Operation
Connect the main air line to the quick disconnect
fitting (28) on the agitator speed controller. Do not
exceed the maximum air inlet pressure of 100 psi
(0.7 MPa, 7.0 bar).
Set the agitator speed using the knob (16) on
the top of the speed controller. Turn the knob
counterclockwise (outward) to increase agitator
speed. Turn the knob clockwise (inward) to decrease
agitator speed. Once the desired agitator speed is
set, the speed controller will maintain that speed by
regulating the airflow to the air motor.
28
16
TI17260a-1
Turn knob counterclockwise
to increase speed.
Turn knob clockwise
to decrease speed.
To shut off the agitator, disconnect the air supply or
turn the speed adjustment knob clockwise until it is
fully closed.
3A1315A 5