Grindmaster P300E Coffeemaker User Manual


 
Page 8
Cleaning
After Each Brew:
1) Dispose of grounds and rinse brew basket.
2) Rinse shuttle or airpot containers before reuse.
Every Day:
1) Wash brew basket with warm soapy water. The wire basket is removable to aid
cleaning.
2) Remove spray head(s), located above brew basket(s), using gloves or a heavy towel.
Wash off coffee oils and clean any plugged holes.
3) Clean shuttles with warm soapy water and a brush or towel.
4) Clean airpots with warm soapy water and bottle brush. Be careful, glass interior
breaks easily. Use only a soft cloth and warm soapy water or stainless steel polish
on the outside to avoid scratches.
5) Wipe exterior of brewer with a damp cloth. Do not use abrasives which will scratch
surface.
6) If shuttles are to be left on warmer all night, fill with water to avoid coffee oil burn-in.
Shuttle Brewers & Airpot/Shuttle Brewers
WARNING
Burn Hazard!
Hot liquids and surfaces are present in this equipment. To avoid burns use caution when
cleaning. Rinse hot parts with cold water before cleaning. Use gloves or a heavy cloth when
removing hot parts from brewer.