Filter
Top Products
-8- G7153 Universal Bender
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
Introduction. The specifications, drawings, and
photographs illustrated in this manual represent
the Model G7153 as supplied when the manual
was prepared. However, due to Grizzly’s policy of
continuous improvement, changes may be made
at any time with no obligation on the part of
Grizzly. Whenever possible, though, we send
manual updates to all owners of a particular tool
or machine. Should you receive one, add the new
information to this manual and keep it for refer-
ence.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in
Section 3: General
Information.
Additional information sources are necessary to
realize the full potential of this machine. Trade
journals, woodworking magazines, and your local
library are good places to start.
CCLLOOSSUURREE
As with all tools, there is danger associated
with the Model G17153 Universal Bender. Use
the tool with respect and caution to lessen the
possibility of mechanical damage or operator
injury. If normal safety precautions are over-
looked or ignored, injury to the operator or oth-
ers in the area is likely.
SSeerriioouuss ppeerrssoonnaall iinnjjuurryy
mmaayy ooccccuurr..
We have included some important safety
measures that are essential to this machine’s
operation. While most safety measures are
generally universal, Grizzly reminds you that
each workshop is different and safety rules
should be considered
as they apply to your
specific situation.
The Model G7153 was specifically designed for
metal bending operations.
DDOO NNOOTT MMOODDIIFFYY
AANNDD//OORR UUSSEE TTHHIISS BBEENNDDEERR FFOORR AANNYY OOTTHHEERR
PPUURRPPOOSSEE.. MMooddiiffiiccaattiioonnss oorr iimmpprrooppeerr uussee ooff tthhiiss
ttooooll wwiillll vvooiidd tthhee wwaarrrraannttyy..
If you are confused
about any aspect of this machine,
DDOO NNOOTT
use it
until you have answered all your questions.