Filter
Top Products
Model H6247 Meat Grinder-10-
Reduce the risk of electrocution by
keeping all connections dry. DO
NOT touch plugs with wet hands.
DO NOT Submerge in water. Failure
to follow these warning could result
in serious injury.
Cleaning the motor housing:
1. UNPLUG THE MOTOR FROM THE
POWER SOURCE!
2. Wipe down the exterior surface of the
motor with a cloth soaked in a sanitiz-
ing solution. DO NOT submerge the
motor in water!
3. Pay particular attention to the throat
and grinder head portion of the meat
grinder. These areas are not easily
removed from the machine and will
need to be sanitized manually.
4. Flush or scrape out any large pieces
of material left in the throat or grinder
head. A 3" round brush may be useful
for this procedure.
5. Jam a cloth soaked in sanitizing solu-
tion inside the grinder head and throat.
Rinse and repeat this step until these
areas are totally free of meat residue.
Lubrication:
The Model H6247 requires very little lubri-
cation. The following steps on the grinder
head parts will keep them moving freely
and keep them from oxidizing.
1. Be sure to use a non-vegetable
base food service lubricant on this
machine.
2. Place a small drop of lubricant on
the front and rear shanks of the feed
screw.
3. Apply a thin film of lubricant to the cut-
ter dies to prevent them from rusting.
!
Unplug the meat grinder before
performing any cleaning or mainte-
nance.