24 ENGLISH
OPERATION ________________________________
5 Put the base unit
A
onto the intermediate lid
F
that is fitted onto the glass bowl
I
. Make
sure that the indicator of the speed control
and locking / unlocking button
B
is at unlock
position
F. Turn the indicator of button
B
to the locked position
D. Make sure that
the locking handles
D
of the base unit are
clipped properly onto the handles of the glass
bowl
I
.
PULSE
6 Insert the plug into the wall socket.
7 Turn the speed control and locking / unlock-
ing button
B
clockwise and select the desired
speed.
– The appliance starts.
Note
■ You can press and hold down pulse button
C
continuously or intermittently. If you want
to use only the pulse function, turn the speed
control and locking / unlocking button
B
to
the pulse position and press and hold down
pulse button
C
. You can obtain a better qual-
ity of chopping with the pulse function.
PULSE
8 Turn the speed control and locking / unlock-
ing button
B
to the Off position when you
want to finish the operation.
9 Disconnect the power plug from the wall
socket. Remove the base unit
A
and then
the intermediate lid
F
. Carefully take out the
chopping blade
L
carefully. Remove the food
from the glass bowl
I
.
Caution
■ Do not touch the chopping blade with your
bare hands. The chopping blade is very
sharp.
Notes
■ Do not operate the appliance continuously
for more than 10 seconds, in order to prevent
overheating.
■ If the chopping blade
L
does not work or
only turns slowly, first pull out the power plug.
Then take the base unit
A
and the intermedi-
ate lid
F
off. Check the glass bowl to see
if there is something blocking the chopping
blade. Maybe you put too much food and/or
hard food in the glass bowl.
■ If the ingredients stick to the side of the glass
bowl, use the spatula
S
to remove the food
from the glass bowl. The appliance must be
switched off when you do this.
■ Make sure that all rotating parts are stopped
before removing the intermediate lid.
■ Do not operate the appliance when the glass
bowl is empty
■ After use, clean the chopping blade (see the
“Cleaning and Care” section) and store it in
the chopping blade plastic cover.