Filter
Top Products
PNEG-970 S2 Hopper w/ Collector Ring28
Maintenance
1. Maintain the Hopper
A. Use caution when repairing or replacing equipment parts.
B. Make sure ALL decals are legible and tightly attached to the hopper. If necessary, replace
them FREE OF CHARGE by contacting GSI at:
GSI
P.O. Box 20
1004 E. Illinois St.
Assumption, IL 62510
(217) 226-4421
C. Make sure ALL electrical wiring is not damaged, and that it meets proper wiring codes.
D. Make sure ALL components are in good working condition before use.
E. Grease the center pivot tube at least two (2) times each season.
ALWAYS shutdown and disconnect the power supply before adjusting,
servicing or cleaning the equipment.