Filter
Top Products
２１
(2) If noise is caused by tighten loose of screw between the base
cover and freezer body, please make it tight.
(3) If the reason for noise is the aging rubber cushion of
compressor or a loose fastening clip, please change rubber
cushion, or secure clip.
(4) If tubing bumps against freezer body, or against each other,
make adjustments accordingly to remove noise.
(5) If fan blade is blocked and thus causes noise, please clear the
obstacles around the fan, or adjust fan blades.
(6) If the fan supporter is loose and noise is caused, please
tighten.
12.1.7 Poor freezing effect analysis and solutions
(1) Check the position of temperature control dial, if it is set at
“weak” position, please change to “middle” or close to strong
position.
MAINTENANCE SERVICE AND TROUBLE SHOOTING
Maintenance Service and Trouble Shooting
(2) Check the rear side and the top of freezer, if it is too close to
the wall or not; if the freezer is under sunlight directly or if it is
PDF created with pdfFactory trial version www.pdffactory.com