Filter
Top Products
16
EN
•
If the the door is closed, after 5 seconds the delayed start indicator “E” lights , the time-remaining
indicator “
F” will blink and decrease , the programme will start until the delayed start indicator “F” goes
out .
Cancelling or modifying a cycle
•
A cycle that is underway can be modified if it has only been running for a short time. Otherwise, the
detergent may have already been used, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled ( see the paragraph entitled, “Loading the
detergent ”).
•
To modify a cycle that is already underway, press the button “A” , all of the settings will be cancelled.
To set a new cycle, follow the instructions contained in the paragraph entitled “Switching the dish-
washer ON”.
Speedup Wash
You could save your washing time when push button “C” after choosing the programme.
(except for soak programme)
Suggestion
Use this function when there is less cutlery loading.