Filter
Top Products
3
Installation
EN
Positioning the appliance
Positioning the appliance in the desired location. The back should rest against the wall behind it, and the
sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses
that can be positioned to the right or the left to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making
it level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help
ensure proper performance.
Cold water connection
Connect the water supply hose to a threaded 3/4 (gas) connec-
tor, making sure that it is fastened tightly in place (see fig.A).
If the water pipes are new or have not been used for an ex
-
tended period of time, let the water run to make sure that the
water is clear and free of impurities. If this precaution is not
taken, there is a risk that the water inletcan get blocked and
damage the appliance.
fig. A
Warning
The appliance is to be connected to the water mains using new
hosesets and that old hose-sets should not be reused.