Filter
Top Products
SIGNALS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEP: Oven does not accept the
entry, check and try again.
SETTING THE CLOCK
1. Touch TIMER/CLOCK for 3 seconds
to enter programming mode. The
display will show Hr 12
2. Using the number pads enter the 4
digit correct time
a. example 5:23 in entered as 0,5,2,3
b. example 12:15 is entered as
1,2,1,5
3. Press the TIMER/CLOCK pad to
finish.
Please note: If you want to use 24-hour
(Military) time, press the TIMER/CLOCK
pad once after step 1
SETTING THE TIMER
The timer operates as a minute timer.
1. Press TIMER/CLOCK pad.
2. Enter the amount of time you want to
countdown.
3. Press the Start pad. When the time is
up, the timer will signal.
4. The display will show the countdown
time for 5 seconds then revert to the
current clock time. You can check the
timer by pressing the TIMER/CLOCK
NOTE: The timer operates without
microwave energy. The maximum
time you can set is 99 minutes and 99
seconds.
SETTING CHILD LOCK
The safety lock prevents unsupervised
operation by children. Set the function
in standby mode.
To Set: Press and hold STOP/CANCEL
for 3 seconds. Lock icon is indicated on
the display and there will be a long beep.
To Cancel: Press and hold STOP/
CANCEL for 3 seconds, there will be a
long beep. Lock icon disappears from
the display
SETTING THE POWER LEVEL
The default power output setting is
100%. If you want to set a new power
level touch the POWER LEVEL pad,
repeatedly touch POWER LEVEL to
scroll through the different cooking
power levels.
NUMBER
PAD
COOKING
POWER
NUMBER
PAD
COOKING
POWER
P100 100% P-50 50%
P-90 90% P-40 40%
P-80 80% P-30 30%
P-70 70% P-20 20%
P-60 60% P-10 10%
QUICK 30 SECONDS
The Start/+30sec pad can be used to
set the time for cooking or for adding
extra cooking time while food is already
cooking.
NOTE: The microwave’s power level is
automatically set to 100%
EXPRESS COOK
One touch cooking at 100% power is
available by using the Express Cook
feature. When the microwave is idle,
select a cooking time by selecting
the 1 through 6 number pad or the
START/+30 Sec pad. You can add time,
in 30 second increments, by touching
the Start/+30 Sec pad.
OPERATION INSTRUCTIONS
Page 12 • Set UP & USe
ENGLISH