Filter
Top Products
7
Installation Limitations
• Do not install your wine cellar in any location not properly insulated or heated,
e.g. garage etc. Your wine cellar was not designed to operate in temperature
settings below 55˚ Fahrenheit.
• Select a suitable location for the wine cellar on a hard, even surface away
from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking
appliances etc. Any floor unevenness should be corrected with the leveling legs
located on the front and rear bottom corners of the wine cellar.
Dimensions
• Built-in wine cellars need to be ventilated from the front. This feature allows the
unit to be built-in in an enclosed area. The bottom front grille should be clear of
all obstructions. This is absolutely necessary for the air to circulate and for the
unit to operate efficiently. The dimensions for installation are as
follows (WxDxH):
Shelving (will vary by model purchased)
• The shelves are chrome-plated glide-out with wood trim. They are designed
for flexibility and easy cleaning. The shelves are designed to allow free
air movement.
Interior Light
• To complement the look of your wine collection, a soft light has been built
into the wine cellar. The light switch is on the front bottom, or on the electronic
control panel.
Normal Operating Sounds You May Hear
• Boiling water, gurgling sounds or slight vibrations that are the result of the
refrigerant circulating through the cooling coils.
• The thermostat control will click when it cycles on and off.
English
WINE CELLAR INSTALLATIONS