Hamilton Beach 2254 Blender User Manual


 
5
First select LO or HI power using the slide
switch. Next select a speed button. The
blender will run until the OFF button is pushed.
Ice Breaker
is a pulse operation. This allows
instant control of blending action. The blender
runs only as long as you hold the switch.
The Quick Clean function should only
be used to rinse the blender between
batches of processing the same food.
When the processing of a single type of
food is finished, the blender should be
disassembled and thoroughly cleaned
as instructed in “How to Clean.”
To Quick Clean, pour 2 cups (500 ml)
warm water in jar and add 1 drop liquid
dishwashing detergent. Run the blender
on QUICK CLEAN for 10 seconds.
Discard soapy water. Rinse with clean
water.
This function is not a substitute for
regular cleaning as instructed in “How
to Clean.” This function should never
be used when blending any mixture
containing eggs, milk, or any other
dairy products, meats, or seafood.
14-Speed Control Panel*
This blender offers a LO and HI power range
and 16 speeds. First select the power range by
sliding the power switch to LO or HI. Next push
a speed button. The blender will operate until
the OFF button is pressed. The OFF button
also serves as the IceBreaker
/Pulse option.
This allows instant control of blending action.
To use this option, select the LO or HI power range. Then press IceBreaker
/Pulse
button and release. This provides the pulsing action. The blender stops when the
button is released.
16-Speed Control Panel*
Quick Clean
NOTE: On some models with 14 and 16 speeds, the highest speed may be
referred to as SMOOTHIE or FRAPPE.
840124700 ENv03.qxd 3/3/04 10:28 AM Page 5