Filter
Top Products
11
Cleaning, Storage and Maintenance
1. Wash bowl, cover, blade, discs,
removable drive sleeve, food gate,
and food pusher in hot, soapy water.
Rinse and dry thoroughly. See page
5 for information on how to remove
food chute lid for cleaning.
NOTE: Do not store unit with cover
in locked position; this may put
strain on interlock tab.
2. Wipe base, control panel, and cord
with a damp cloth or sponge.
To remove stubborn soil, use a mild
non-abrasive cleanser.
NEVER IMMERSE THE BASE IN
WATER OR OTHER LIQUID.
3. To store, place bowl on base. Then
place Chopping/Mixing Blade on
motor shaft and Slicing/Shredding
Disc on Chopping/Mixing Blade.
The Removable Drive Sleeve may be
stored in the bowl. Place cover on
bowl but do not lock.
4. Monthly place a drop of vegetable oil
on each screw in the food chute.
The suction cup feet on the bottom of
your Big Mouth
™
Food Processor are
designed to keep the unit stationary
during use. To maximize the life of your
Big Mouth
™
please review the following
directions:
OR
With Big Mouth
™
fully assembled: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side.
With Big Mouth
™
fully assembled: lift it
from counter by
grabbing the han-
dle as shown and
lifting from same
side as handle.
With bowl and lid removed from Big
Mouth
™
: lift it
from counter by
placing hands
under unit as
shown and lifting
to one side
OR
How to Release Suction Cup Feet
After Use
840129200 Ev01.qxd 7/6/04 9:07 AM Page 11