Filter
Top Products
7
Processing Using Chopping/Mixing Blade
Please see the Easy to Use Assembly
Guide on page 5.)
The Chopping/Mixing Blade can be
used to coarsely chop, finely mince,
mix, or puree food to a smooth consis-
tency.
1. Make sure the Control Switch is turned
to OFF and the unit is unplugged.
2. Lock the bowl onto base. (See “How
to Lock the Bowl” on page 6.)
3. Place the Chopping/Mixing Blade
onto motor shaft of food processor in
center of bowl. Turn slowly until blade
drops into place. Handle carefully;
the blade is sharp.
4. Lock cover onto bowl. (See “How to
Lock the Cover” on page 7.) Insert
food pusher into food chute.
5. Plug in unit and process food.
The processing speed and time will
determine the finished consistency
of the food. The Pulse button can
help you avoid overprocessing.
Chopping/
Mixing Blade
Motor
Shaft
How to Operate the Controls
The control is conveniently located on
top of the base. Rotate the knob to
select a speed: 1 (Low) or 2 (High). The
processor will run continuously. For
instant on and off control, use the
PULSE button.
How to Lock the Cover
Align cover as illustrated. Place cover
on bowl and turn clockwise until it
locks into place.
NOTE: The food processor will not
work unless the cover is locked into
position.