Hamilton Beach 840141302 Blender User Manual


 
Screw on jar nut firmly. Injury can result if moving blades
accidentally become exposed.
If the jar should turn when the motor is switched ON, switch
OFF immediately and tighten jar in jar nut, Sure Rest™ base,
or cutting assembly.
Do not leave blender unattended while it is operating.
To disconnect cord, turn the control to OFF. Then remove
plug from wall outlet.
Do not use appliance for other than intended purpose.
SAVE THESE INSTRUCTIONS
3
OTHER CONSUMER SAFETY INFORMATION
This appliance is intended for household use only. Use for food
or liquids only.
WARNING! Shock Hazard: This appliance has a polarized plug
(one wide blade) that reduces the risk of electric shock. The
plug fits only one way into a polarized outlet. Do not defeat
the safety purpose of the plug by modifying the plug in any
way or using an adaptor. If the plug does not fit, reverse the
plug. If it still does not fit, have an electrician replace the
outlet.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in, or tripping over,
a longer cord. If a longer cord is necessary, an approved
extension cord may be used. The electrical rating of the
extension cord must be equal to or greater than the rating of
the blender. Care must be taken to arrange the extension
cord so that it will not drape over the countertop or tabletop
where it can be pulled on by children or accidentally tripped
over.
Do not place blender jar in the freezer filled with food or liquid.
The contents may freeze and may result in damage to the
cutting blades, jar, blender and possibly result in personal injury.
If the cutting blades lock and do not move, it will damage
the motor. Do not use. Call the toll-free customer service
number for information.
840141302 v03.qxd:840141301 Blender 10/8/08 11:29 AM Page 3