Filter
Top Products
CONTROL PANEL
First select and push a
LOW or HIGH power
button, then push
desired speed button.
The blender will run until
you push the OFF button. The OFF button is also the
Ice Breaker
™
/Pulse Button. When using Pulse or
IceBreaker, the blender will only run as long as the
button is pushed. As buttons are pushed left to right,
the speed at which the blades spin will increase.
BEFORE FIRST USE
After unpacking the blender, follow instructions in “How
to Clean.”
HOW TO ASSEMBLE AND USE
6
IMPORTANT: Your blender jar and cutting blades are sub-
ject to wear during normal use. Always inspect jar for
nicks, chips, or cracks. Always inspect cutting blades for
broken, cracked, or loose blades. If jar or cutting blades
are damaged, do not use. Call our toll-free customer
service number to obtain replacement parts.
■ Make sure blender is unplugged. Place blender base
on clean, dry surface to keep foreign particles from
being pulled up into motor during operation.
■ Place cutting blades in Sure Rest
™
jar base. Set jar on
top of cutting blades and tighten on jar base.
■ Make sure the Sure Rest
™
jar base is firmly screwed
onto the jar. If not, it may loosen later when motor is
turned on.
■ Set assembled jar into place on blender base, making
sure it is securely seated. If not, gently rock the jar until
seated.
■ Plug cord into outlet.
840141302 v03.qxd:840141301 Blender 10/8/08 11:29 AM Page 6