Filter
Top Products
SKU 42787 For technical questions, please call 1-800-444-3353. Page 6
Removing and Replacing the Blade
CAUTION! WHEN REMOVING AND REPLACING BLADE, BE ALERT TO SHARP
BLADE TEETH!
Make certain that the Food Slicer is OFF and UNPLUGGED. Turn the Blade As-1.
sembly (15) counterclockwise to unlock it. Pull out the Blade Assembly.
CAUTION! BEFORE FIRST USE AND AFTER EVERY OTHER USE, CLEAN THE
BLADE ASSEMBLY AS DESCRIBED ON PAGE 3.
To reinsert the Blade Assembly (15), line up the tabs on the Blade Assembly (15) 2.
with the slots in the Small Gear (11). Once the Blade Assembly is seated with the
Small Gear, turn the Blade Assembly clockwise to lock it in position.
For Best Results
Chill foods thoroughly before slicing.•
Slice foods wafer thin.•
Foods should be boneless.•
Fish and thin steaks will slice better if partially frozen.•
When slicing warm roasts, make certain to remove strings before slicing.•
MAINTENANCE
Never use Steel Wool or scouring powder on any part of the Food Slicer.1.
To eliminate risk of health hazards: Before assembling the Food Slicer, and with 2.
the electrical plug unplugged, thoroughly wipe off all parts with a clean rag using
warm soapy water and a mild anti-bacterial detergent. In addition, the following
parts should be cleaned in a dishwasher: Food Pusher (3), Blade Assembly (15),
and Food Tray (2).
Clean the Food Slicer after every use. Failure to follow all cleaning instructions 3.
and warnings may result in serious illness due to food poisoning.
STORAGE
Line up the Adjusting Plate (9) with the Blade. Remove the Food Pusher (3) and
Food Tray (2). Fold up the Platform (4) against the Main Body (1). Wrap the Cord (16)
and store it under the Food Slicer. Store the entire unit in a sealed clean plastic bag.
The Food Slicer should be stored in a location that is out of reach of children.