Filter
Top Products
ASSEMBLY
1. Carefully push the Tail Landing Gear (6) into its slot, being careful not to prick a finger on the
end of the gear wire. See Figure 1.
Figure 1 Figure 2
2. Hold the Fuselage (4) with the bottom side up in one hand and carefully push the Main Landing
Gear (5) into the slot provided. Tuck Battery (8) into Battery Compartment (12) being careful to
push Female Battery Connector (3B) towards the top of the Fuselage (4). See Figure 2.
3. Carefully snap Main Wing (1) onto Fuselage (4) at Attachment Points (11)* being careful to tuck
the Male Battery Connector (3A) into the Connector Opening (10) located on the top section.
Make sure to plug the Male Battery Connector (3A) into the Female Battery Connector (3B)
before securing the Main Wing (1). See Figures 3A and 3B.
*NOTE: The Main Wing (1) attaches to the Fuselage (4) by inserting the Button Fasteners (17) on
the Main Wing into the Attachment Points (11) located on either side of the Connector Opening (10)
on top of the Fuselage (4). Slide the Main Wing (1) forward to secure the attachment. (To remove
the Main Wing (1) for storage, just reverse the process.) See Figure 3A.
SKU 95149 - For technical questions, please call 1-800-444-3353. Page 4
6