Harbor Freight Tools 95149 Microwave Oven User Manual


 
CHARGING
When the Red LED light flashes, it is time to recharge the batteries.
To charge Rechargeable Batteries: Turn the Transmitter Power Switch to OFF. Remove the Battery
(8) through the bottom of the Fuselage (4). Plug the Female Battery Connector (3B) into the port on the
back of the Transmitter/Battery Charger (15). See Figure 5. The Red LED will change to the Yellow LED
while charging. When the Battery (8) is fully charged (3 to five minutes), the Green LED will come on
steady. See Figure 7. Your Airplane is now charged and ready to fly again.
PARTS LIST
No#: Description Qty No# Description Qty
1 Main Wing 1 9 Battery Compartment Cvr. 1
2 Motors w/Propellers 2 10 Connector Opening 1
3A Male Battery Connector 1 11 Attachment Points 2
3B Female Battery Connector 1 12 Battery Compartment 1
4 Fuselage 1 13 Tail Rudder 1
5 Main Landing Gear 1 14 Antenna 1
6 Tail Landing Gear 1 15 Transmitter/Battery Charger. 1
7 Tail Wing 1 16 Transmitter Battery
8 Battery (Rechargeable) 1 Compartment Cover 1
17 Button Fasteners 2
SKU 95149 - For technical questions, please call 1-800-444-3353. Page 7
Figure 7
Throttle Direction Control
3 LED Lights
RED: needs charge.
YELLOW: Charging.
GREEN: Charged.
Throttle Control
Transmitter Power Switch