Filter
Top Products
SKU 99598/99599 For technical questions, please call 1-800-444-3353. Page 7
Slide Cutting Blade (9) onto Feed 4.
Screw, making sure the edges of Cut-
ting Blade face front of housing.
WARNING!5. Cutting Blade has sharp
blades. Wear gloves and use care
when installing Cutting Blade.
Slide selected Cutting Plate (6, 7, or 6.
8) over Cutting Blade, using the slot
along Plate edge as guide.
Screw Cap (1) into place on hous-7.
ing until secure. CAUTION! Do not
overtighten.
Slide Hopper Plate (13) onto top of 8.
Head until secure.
Set Grinder on at and stable counter 9.
space that does not block vents along
bottom of housing.
Cut foods into small pieces that can 10.
easily t into Hopper.
OPERATION
(FOR 99598 MEAT GRINDER)
Read the ENTIRE IMPORTANT
SAFEGUARDS section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Once food is ready, plug in Power 1.
Cord (17) and press Switch (20) to
activate.
Feed food into Hopper Plate. Use 2.
Food Pusher (14) to press food down
Plate and into Head.
WARNING! Do NOT use ngers to 3.
push food into Grinder. Only use
Food Pusher.
To make sausage, insert desired 4.
Sausage Maker (3, 4, or 5) into Sau-
sage Adapter (2).
Place wide end of Sausage Adapter 5.
against the Head and in front of Cut-
ting Blade.
Slide Cap over Sausage Maker and 6.
Adapter and turn clockwise until Sau-
sage Adapter is fastened securely
against housing. CAUTION! Do not
overtighten.
For making Kubbe, place Kubbe At-7.
tachments (10, 11) onto Feed Screw
shaft. Slide down until the Attach-
ment tabs t into the slots.
Slide Cap over Attachments and turn 8.
clockwise until fastened securely
against housing. CAUTION! Do not
overtighten.
ASSEMBLY
(FOR 99599 MEAT GRINDER)
Read the ENTIRE IMPORTANT
SAFEGUARDS section at
the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION OR ELECTRIC
SHOCK:
Before appliance assembly or
adjustment, make sure the
appliance’s switch is turned
off, the cord is unplugged,
and the unit has cooled
completely.