Filter
Top Products
Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.
41
Quality of Flames
On Natural Gas the burners flames should be a
blueish color with, at most, a slight yellowish fringe.
On Propane gas the flames may be “softer”. The
cooktop burner flames may have a slight yellowish
tip.
If the flame burns with a long white tip you should call
for service.
Normal flame appearance Burner not fitted correctly
MAKE SURE THE FLOW OF COMBUSTION
AND VENTILATION AIR TO THE RANGE IS
UNOBSTRUCTED.
MAKE SURE ALL CONTROLS ARE LEFT IN THE
OFF POSITION.
Customer care
Please complete your details in the inside cover of
this Guide. Then replace this Installation Guide back
in the Customer Care Pack in the correct position.
Please inform the user how to operate the range and
hand over the Customer Care Pack
Thank you.
How To Remove the Range
for Servicing
Follow these procedures to remove appliance for
servicing:
The range is very heavy. Take great care. We
recommend two people maneuver the range. Ensure
that the floor covering is firmly attached, or removed
to prevent it being disturbed when moving the range
around. You will need the leveling tool.
Pull the drawer out to its furthest point.
Lift up the ends of the plastic clips (one each side)
to release the catches holding the drawer to the side
runners and at the same time pull the drawer forward
and away from the side runners. For safety’s sake
push the drawer runners back out of the way. Put the
drawer somewhere safe - do not refit it until you have
finished, you will need access to the area behind the
drawer.
Fit the leveling tool on the rectangular adjuster as
shown below.
Lower the front roller by turning the leveling tool
clockwise until the front feet are just clear of the floor.
Slide range forward to disengage the range from the
anti-tip bracket.