Filter
Top Products
Henny Penny Model BCC/BCR-140, BCC/BCR-175, BFR/BCR-350
201 2-3
2-3. ELECTRICAL Refer to the table below for electrical ratings for both models.
(Continued) Model No. Volts Watts Amps Freq. Phase
BCC-140 200 4700 18 50/60 3
208-240 4700 18 60 3
230 4700 20 50 1
BCC-175 200 5800 20 50/60 3
208-240 5800 20 60 3
400 5800 9 50 3N
BCR-140 208-240 2400 12 60 1
230 2400 10 50 1
200 2400 12 50-60 1
BCR-175 200 2400 12 50/60 1
208-240 2400 12 60 1
230 2400 12 50 1
BFR & 200 4100 15 50/60 3
BCR-350 208-240 4100 15 60 3
400 4100 10 50 3N
2-4. LOCATION The Blast Chillers should be placed in an area where the doors can
be opened, for loading and unloading, without interruption. For
proper operation, the cabinet must be level.
For maximum efficiency, if the air temperature of the premises
is more than 100° F (38° C), the room should have adequate
ventilation, taking into account for the heat emitted by the unit.
Clearances should be as follows:
BCC/BCR-140 Top...........16 in. (400 mm) for air circulation
Left Side ...4 in. (100 mm) for air circulation
Right Side . 8 in. (200 mm) for air circulation
Back .........4 in (100 mm) for air circulation
Front ........26 3/8 in (668 mm) for door swing
BCC/BCR-175 Top...........16 in. (400 mm) for air circulation
Sides ........3 in. (70 mm) for air circulation
Front ........33 3/8 in. (847 mm) for door swing
BFR & Top...........16 in. (400 mm) for air circulation
BCR-350 Sides ........3 in. (70 mm) for air circulation
Pass Thru-Front and Back ... 38 1/8 in (970 mm) for door swing
Solid Back-Front ................... 38 1/8 in. (970 mm) for door swing
Back ................... 4 in. (100 mm) for air circulation