Filter
Top Products
This checklist provides step-by-step ProLiant Cluster F200 for MSA1000 operating system installation
and cluster configuration directions using Microsoft Windows Server 2003, Enterprise Edition.
Software and Hardware Requirements
The following table provides a checklist of the required software versions and, if applicable, any items
to execute before beginning the installation. Place a checkmark (3) in the box after completing each
step.
3
Software and Hardware Requirements
Before installing your HP ProLiant F200 for MSA1000 cluster solution, it is very important to refer to the HP Cluster
Configuration Support website for details on components that make up a valid cluster configuration. There is a support
matrix for each HP Cluster that details components that represent quality tested and supported HP Cluster
configurations.
Using the link below, select the appropriate operating system and storage platform and then refer to the row of
deliverables that are relevant to the configuration you require.
The HP Cluster Configuration Support website can be found at
http:/h18022.www1.hp.com/solutions/enterprise/highavailability/answercenter/configuration-all.html
SmartStart CD.
Two supported ProLiant servers, supported Fibre Channel Adapters (FCA), two or more supported network adapters,
two supported Fibre Channel switches or hubs, and one or more MSA1000(s).
Review and understand any Read This First (RTF) and Getting Started cards that were shipped with the product.
Microsoft Windows Server 2003, Enterprise Edition software and documentation.
If applicable, Microsoft Windows Server 2003, Enterprise Edition service pack.
HP StorageWorks MSA1000 Support Software CD.
Array Configuration Utility (ACU), which is located on the HP StorageWorks MSA1000 Support Software CD.
HP Insight Manager (optional).
MSA1000 controller firmware.
EMU firmware.
FCA firmware and boot bios.
Fibre Channel switch firmware.
HP StorageWorks for Windows Workgroup Edition (Included in the ProLiant Cluster F200 for Entry Level SAN Cluster
Kit).
Sufficient software rights to install the operating system and software applications on each node.
Ensure all hardware is installed and properly cabled as shown in figure 1 - hardware cabling scheme on page 3.
4