Filter
Top Products
21
37
37
37
37
37
FANS
The evaporator fans are equipped with either
9 watt fan motors, 1550 RPM’s, or 12 watt fan
motors, 1650 RPM’s. Both motors have a counter
clockwise rotation when viewed from the shaft end.
The fan blades are 8” in diameter and the blades are
pitched to 37 degrees on each model as shown on
the chart below. It is important that the blade
pitch be maintained as specified. Do not
attempt a field modification by altering the
blades.
Fan motors may be changed with an easy
two-step process without lifting up the plenum,
thereby avoiding the necessity to unload the entire
product display to make a change:
1. Unplug the fan motor, easily accessible out
side the plenum
2. Remove two fasteners, then lift out the
entire fan basket
NO.
FANS
BLADE
PITCH
2 2 3
37º 37º 37º
4’ 6’ 8’
MODEL O5DMA
2
1
MODEL
O5DMA-4’
& O5DMA-6’
MODEL
O5DMA-8’
W
ARNING
Disconnect power to the fans
before cleaning or servicing
case .
HIGH
PRESSURE