Filter
Top Products
– 8 –
LUBRICATION
WARNING: UNPLUG MACHINE POWER CORD.
The carriage slide rod reservoir (Fig. 11) should be filled monthly with several drops of Lubriplate
FM0-200-AW oil. A four-ounce container of this oil was supplied with the slicer. DO NOT use vegetable
oil.
Occasionally, the gauge plate slide rods (Fig. 12) should be lightly coated with Lubriplate FM0-200-
AW (4 oz. container supplied). Turn the index knob fully counterclockwise when lubricating these slide
rods, and then turn it fully clockwise when finished. Wipe off excess lubricant.
DO NOT lubricate the meat grip slide rod (Fig. 12). It must be kept clean but not lubricated.
Fig. 11 Fig. 12
Additional quantities of Lubriplate FM0-200-AW are available from your local Hobart Service Office.
The motor has sealed bearings and requires no lubrication maintenance.
WEAR ADJUSTMENT
After several years of operation and many sharpenings of the knife, it may become necessary to have
the gauge plate adjusted closer to the knife. Contact your local Hobart Service Office if this service
becomes necessary as it must be done by an authorized Hobart Service Technician.
FORM 19370 (4-95) PRINTED IN U.S.A.
Gauge Plate
Slide Rods
Meat Grip
Slide Rod
PL-40620-2
PL-22247
Slide Rod Reservoir