Filter
Top Products
– 5 –
Fig. 2
OPERATION
SAFETY
SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING
POSITIONS ANYTIME THE SLICER IS IN USE.
The T
OP KNIFE COVER must be in position and secured with the LATCH KNOB (Fig. 2). The RING GUARD is
not removable. The D
EFLECTOR, mounted below the slicer knife, can be removed for cleaning.
The M
EAT GRIP (Fig. 2) must be used when slicing short ends to keep your hand(s) away from the knife.
When the slicer is not running, the I
NDEX KNOB (Fig. 2) must be turned back below zero (fully clockwise).
The G
AUGE PLATE will then cover the knife edge.
Always UNPLUG the P
OWER CORD before cleaning or moving the Slicer.
WARNING: ROTATING KNIFE. USE FEED GRIP. UNPLUG MACHINE POWER CORD BEFORE
CLEANING, SERVICING, OR REMOVING PARTS. REPLACE PARTS BEFORE USE.
PL-41415-1
SWITCH KNOB
LEVER IN AUTOMATIC (RIGHT) POSITION
LATCH KNOB
GAUGE PLATE
TOP KNIFE
COVER
CARRIAGE TRAY
SHARPENER
INDEX KNOB
CARRIAGE HANDLES
MEAT GRIP
RETAINING CLIP
WEIGHT /
SLICE COUNT CONTROL
CARRIAGE SPEED CONTROL
SLICE / PAUSE BUTTON
Model 2912PS Slicer