Filter
Top Products
– 10 –
MAINTENANCE
WARNING: DISCONNECT ELECTRICAL POWER AND PLACE A TAG AT THE DISCONNECT
SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT BEFORE BEGINNING ANY
MAINTENANCE PROCEDURE.
LUBRICATION
The motor has permanently lubricated ball bearings and requires no additional lubrication.
CHANGING SAW BLADES
If changing saw blades, disassemble components as described in R
EMOVING THE BLADE, page 5, and
the instructions for any component throughout the manual. Make sure wipers and all other components
are properly reassembled. Refer to B
LADE TENSION ADJUSTMENT and ADJUSTING THE BLADE BACK-UP
BLOCKS, page 5. Refer to BLADE GUIDE, page 6.
SERVICE
Contact your local Hobart Service Office for any repairs or adjustments needed on this equipment.
FORM 19465 (11-95) PRINTED IN U.S.A.