Filter
Top Products
– 10 –
MAINTENANCE
LUBRICATION
No lubrication is required for the food waste disposer. The disposer has grease packed sealed bearings
requiring no service.
CUTTER BLOCKS
The cutter blocks (1, Fig. 1) may be rotated by a qualied Hobart Service Technician if the cutting edges
become worn.
OVERLOAD PROTECTION
The disposer motor is protected by a thermal, resetable overload protector and will trip if the motor is
overloaded. To reset, allow approximately ve minutes for cooling, then press the manual reset button
located on the motor shell opposite the motor junction box. An arrow on the motor shell indicates location
of the button. Restart the disposer using normal operating procedure. If overload protector continues to
trip, contact your local Hobart Service Ofce.