Filter
Top Products
– 16 –
LIGHTING INSTRUCTIONS FOR MANUAL PILOT IGNITION (Filter Ready Models, Fig. 6)
CAUTION: Before turning the burners on, the fry tank must be filled with liquid or melted
shortening.
200
250
300
4
OFF
PILOT
OFF
ON
PL-50293
Fig. 6
1. Turn thermostat knob (located behind the door panel) to OFF.
2. Push gas valve extension arm in and turn arm to OFF. Wait 5 minutes for unburned gas to vent.
3. Push gas valve extension arm in and turn to PILOT.
4. While still depressing the arm, light the pilot with a lit taper. Continue with steps 2 through 4 until
the pilot remains lit when the extension arm is released.
5. Push in and turn gas valve extension arm to ON.
6. Repeat steps 1 through 5 if gas supply is interrupted.
TURNING THE FRYER ON (Filter Ready models)
To turn the fryer on, set the thermostat knob to the desired temperature.
When the set temperature is reached, the gas control shuts off gas flow into the burners. The pilot
remains lit. The burners will cycle on and off to maintain set temperature.