Filter
Top Products
– 12 –
Pulse Button
Selects the pulse time setting. A cook time must be set first. The pulse time can then be set equal to
or less than the cook time. The pulse time will be the portion of cook time to operate in the pulse mode.
Pulse mode will start first. When pulse time elapses, the remainder of the cook time will be in the non-
pulse mode.
Use when cooking delicate product, such as strudel, muffins, cupcakes, meringue pies, etc., to keep
product from forming waves on the top.
Use the Pulse Button to switch between the selection of pulse mode and non-pulse mode. A pulse time
of zero selects non-pulse mode.
The light in the Pulse Button will be lit when in the pulse mode.
Pulse Mode — The fan cycles ON 45 seconds and OFF 45 seconds for the duration of the Pulse cycle.
• The fan stays on while the heat cycles in hold mode.
• The fan stays on while heat cycles at 100% power when not timing.
• Pulse Mode can be switched on or off at any time.
Stop / Start Button
1. Starts timing a product in the mode selected if a cook time has been set.
2. Stops timing of a product if a timing sequence has already started.
Hold Button — Selects Hold mode.
1. Allows selection of hold temperature.
2. Temperature indication of ---°F (---°C) indicates no hold mode.
Hold Button Light — Is lit when in the Hold mode.
1. When not timing, allows setting / enabling a hold mode setting of ---°F (---°C), meaning no hold
will take effect.
2. Any other temperature means that when the actual cook time has ended, the oven will enter the
Hold mode and use the hold temperature.
On / Off / Cool Down Switch
1. ON turns oven control circuits on.
2. OFF turns oven control circuits off.
3. COOL DOWN allows the fan motor to run with the doors ajar to speed oven cooling.
Gas Valve — When ON, allows gas to flow to the ignition system.
LIGHTING THE HGC20D OVEN
1. Turn manual gas valve ON.
2. Push the ON / OFF / COOL DOWN switch ON and set the THERMOSTAT to its maximum setting.
The HEAT light should come on. If HEAT light is not on, make sure the door is closed.
3. If the oven fails to light, push the ON / OFF / COOL DOWN switch OFF. Wait 5 minutes before
trying to relight the oven.