Filter
Top Products
— 4 —
THIS IS AN ADDENDUM TO PAGE 16 OF FORM 34046
Programming Menu Buttons
1. Before entering the program mode, you must first press a Menu Button. Press desired Menu
Button once to access Programs 1-5; twice for Programs 6-10; and three times for Programs 11-
15. The selected Menu Button’s LED will light.
2. To enter Program mode, press and hold both and simultaneously until time display
shows "PROG" (approximately 2 seconds). The LED on Menu Button #1 and Cooking Process
Indicator will start blinking.
3. Cook function time and temperature must be programmed first.
Press and hold while pressing or to adjust to temperature desired.
• Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°C).
Press and hold while pressing or to adjust to time desired.
• Maximum time setting is 5 hours, 59 minutes.
4. Program the Grill function for Menu Button #1 (if needed).
Press . The Grilling Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold while pressing or to adjust to temperature desired.
• Maximum allowable temperature setting is 480°F (249°C); minimum is 32°F (0°C).
Press and hold while pressing or to adjust to time desired.
5. Program the Warm/Hold function for Menu Button #1.
Press . The Warm/Hold Process Indicator and LED on Menu Button #1 will start blinking.
Press and hold while pressing or to set temperature for the hold cycle.
You cannot program a time for the warm/hold function. If you try to program a time, the buzzer
will sound for 3 seconds, then shut off.
6. Press flashing Menu Button #1 to lock in the programmed settings.
After programming, the display will show the program number and “15 Pr.”
7. Continue programming Menu Buttons 2-5 in the same manner. All functions must have a value
entered to allow the program to work properly.
Verifying Programmed Temperatures and Times
Cook function: Press and hold the desired Menu Button, then press
.
Grill function: Press and hold the desired Menu Button, then press
.
Warm/Hold: Press and hold the desired Menu Button, then press
.
• Only the temperature will be displayed in the Warm/Hold function.
• Time display will show "00:00".
SSERP
UNEM
NOTTUB
1
UNEM
NOTTUB
2
UNEM
NOTTUB
3
UNEM
NOTTUB
4
UNEM
NOTTUB
5
emiT1
margorP
1
margorP
2
margorP
3
margorP
4
margorP
5
semiT2
margorP
6
margorP
7
margorP
8
margorP
9
margorP
01
semiT3
margorP
11
margorP
21
margorP
31
margorP
41
margorP
51